Karndean Remove (750ml) – covers 40m2 of flooring when diluted as per instructions

1. Prepare the floor: Sweep the floor with a soft bristle brush or use a vacuum set to the hard floor setting to remove loose dust and dirt.
2. Mix the solution: In a bucket, dilute 1-part Karndean Remove with 5-parts clean, warm water.
3. Apply: Spread the solution liberally over the floor with a household mop.
4. Let it sit: Allow the solution to work on the floor for 5 minutes. Do not let the product dry on the surface.
5. Scrub: Use a coarse (white) floor pad or a non-abrasive nylon scouring pad to scrub away the loosened dirt and polish.
6. Rinse thoroughly: Mop the entire floor repeatedly with clean, warm water. Ensure all traces of the remover are gone; otherwise, the floor may dry with a streaky appearance.

Coverage

750ml – covers 40m2 of flooring when diluted as per instructions