To mainland UK on any order size

Order by 2pm for same-day despatch

No minimum order, same prices for all

From over 1,500 ratings in 12 months

Description

Reviews ★★★★★ 100% positive · collected through our eBay store
★★★★★
“Amazing service! The dispatch was rapid, the item is quality and the price is unbeatable for the amount you get.”Verified buyer · n***s
★★★★★
“This is my 3rd order with the Flooring Place and yet again they've delivered a quality item within a couple of days.”Verified buyer · o***a
★★★★★
“Excellent company to purchase from, amazing customer service.”Verified buyer · a***0
Delivery

Free 3 working day delivery to mainland UK on any order size.

Next working day delivery from £5.99 (£5.99 for the first item, plus £3 per additional item). Order by 2pm for same-day despatch. Weekend orders are despatched on Monday.

Highlands and islands can take an extra day and carry a charge of £9.99, plus £9.99 for each additional item.

See our full delivery information, including tracking and returns.

Description

Kelmore PrimeMore MVS is a ready-to-use moisture vapour suppressant for screeds and concrete that still hold construction moisture. Two coats let you level and lay the floor sooner, on floors up to 95% RH (85% RH on heated screeds). It also primes the floor, so a Kelmore levelling compound goes straight on top.

  • For construction moisture up to 95% RH
  • Heated screeds up to 85% RH
  • Two coats, the second at right angles to the first
  • Up to 40m² per 10kg (two coats)
  • Touch dry in about 20 minutes (first coat) and 30 minutes (second coat) at 20°C
  • Tinted purple, so you can see full coverage

Please note: only use it where the floor has an effective structural damp proof membrane.

Where can I use it?

  • Cement screedsSuitableUp to 95% RH
  • Heated screedsSuitableUp to 85% RH
  • ConcreteSuitableIncluding power floated, once prepared
  • No DPM in the floorNot suitableUse Kelmore One Coat DPM Fast
Questions

How many coats do I need?Two. Roll the first coat in one direction, then once it’s touch dry, roll the second at right angles to it. If you can see pinholes or thin patches once it’s dry, add another coat.

How far does 10kg go?Up to 40m² for two coats on a smooth floor. Rough or porous floors take more.

When can I level over it?Once the second coat is dry, about 30 minutes at 20°C. Lay a Kelmore levelling compound at least 3mm thick within 24 hours. If you go past 24 hours, apply another coat first.

Do I need a primer as well?No. Two coats of MVS prime the floor, so the levelling compound goes straight on.

Which screeds can go on top?Kelmore levelling compounds, such as Absolute 30, LevelMore Pro and Flex & Fibre.

What if the floor is rough?Smooth it first with Absolute 30, LevelMore Pro or Flex & Fibre. They’re moisture tolerant, so they can go down before the MVS.

Can I use it over underfloor heating?Yes, on heated screeds up to 85% RH. Switch the heating off 48 hours before you start.

Is it a damp proof membrane?No. It’s for moisture left in a new screed or concrete slab that’s still drying out. The floor still needs a structural DPM underneath. For a damp floor with no DPM, use Kelmore One Coat DPM Fast.

Can I use it in the cold?The air and the floor both need to be 10°C or above.

Additional information

Weight10 kg
Dimensions30 × 30 × 26 cm
Manufacturer

Kelmore

Specifications

Pack size: 10kg

Coverage: Up to 40m² (two coats)

Colour: Purple

Drying time: First coat about 20 minutes, second coat about 30 minutes (at 20°C)

Suitable for: Cementitious screeds and concrete up to 95% RH; heated cementitious screeds up to 85% RH

Use: Interior floors, domestic and commercial

Technical data sheet: Open PDF

Applications

  1. Check. Structural DPM in place. Up to 95% RH, or 85% RH on heated cementitious screeds.
  2. Prepare. Clean, sound and dry, free from dust, oil, grease and laitance. Pre-smooth rough floors with LevelMore Pro, Absolute 30 or Flex & Fibre.
  3. First coat. Stir, then roll on in one direction with a medium pile roller.
  4. Second coat. Once touch dry (about 20 minutes), roll at right angles to the first.
  5. Wait. About 30 minutes until tack-free and pinhole-free. Recoat any thin patches.
  6. Next. Apply a Kelmore levelling compound, at least 3mm thick, within 24 hours. After 24 hours, add another MVS coat first.

Please note: 10°C or above. Do not bridge movement joints.

Kelmore PrimeMore MVS (10kg)

£124.99

£124.99

Quantity required

In stock

How many bags do I need?

VisaMastercardApple PayGoogle Pay
Free 3 working day deliveryTo mainland UK on any order size
Next working day from £5.99Order by 2pm for same-day despatch
Not sure how much you need? Call 01482 243038 (Mon–Fri, 9am–5pm)
Need a mix of screeds on one pallet? Call 01482 243038 for a quote