To mainland UK on any order size

Order by 2pm for same-day despatch

No minimum order, same prices for all

From over 1,500 ratings in 12 months

Description

Reviews ★★★★★ 100% positive · collected through our eBay store
★★★★★
“Amazing service! The dispatch was rapid, the item is quality and the price is unbeatable for the amount you get.”Verified buyer · n***s
★★★★★
“This is my 3rd order with the Flooring Place and yet again they've delivered a quality item within a couple of days.”Verified buyer · o***a
★★★★★
“Excellent company to purchase from, amazing customer service.”Verified buyer · a***0
Delivery

Free 3 working day delivery to mainland UK on any order size.

Next working day delivery from £5.99 (£5.99 for the first item, plus £3 per additional item). Order by 2pm for same-day despatch. Weekend orders are despatched on Monday.

Highlands and islands can take an extra day and carry a charge of £9.99, plus £9.99 for each additional item.

See our full delivery information, including tracking and returns.

Description

Kelmore PrimeMore Universal is a water-based primer for porous floors and walls, such as concrete, sand and cement screed and plywood. It controls how much the surface soaks up, so the levelling compound or tile adhesive that follows bonds properly and finishes smoother. Mixed 1:3 with water, 5 litres primes up to 220m².

  • Mix 1 part primer to 3 parts water
  • Up to 220m² per 5L, mixed
  • Dry in about 30 minutes at 20°C
  • Tinted blue
  • Floors and walls, inside and outside

Where can I use it?

  • Concrete & screedsSuitableSand and cement, including heated
  • PlywoodSuitableClass 3 plywood overlay
  • WallsSuitableRender, blockwork, plaster, plasterboard
  • Tiles & non-porousNot suitableUse PrimeMore Grip
Questions

How far does 5 litres go?Up to 220m² when mixed 1:3 with water. That’s up to 44m² per litre of primer.

Do I have to dilute it?Yes. Mix 1 part primer to 3 parts water, then apply one even coat with a roller, sponge or brush. Very porous floors may need another coat.

How long does it take to dry?About 30 minutes at 20°C. Then you can lay the levelling compound or tile adhesive.

Which screeds is it for?LevelMore Pro, Absolute 30 and Flex & Fibre, on concrete and sand and cement screed.

Can I use it on tiles or vinyl?No. It’s for porous surfaces only. On tiles, old vinyl, asphalt or an epoxy DPM, use PrimeMore Grip.

Can I use it in the cold?Apply it at 5°C or above, and keep it away from frost.

Additional information

Weight14 kg
Dimensions30 × 30 × 26 cm
Manufacturer

Kelmore

Specifications

Size: 5L

Coverage (diluted 1:3): Up to 220m² per 5L

Dilution ratio: 1:3 (1 part primer : 3 parts water)

Drying time: Approx. 30 minutes at 20°C

Colour: Blue (pigmented)

Suitable for: Porous/absorbent wall and floor backgrounds

Use: Interior and exterior

Technical data sheet: Open PDF

Applications

  1. Use on. Porous floors and walls: concrete, sand and cement screed (including heated), plywood, tile backer boards, render, blockwork and plaster.
  2. Prepare. Surface dry, sound and clean, free from dust, oil, grease and laitance.
  3. Mix. Shake well. 1 part primer to 3 parts cold water.
  4. Apply. Even coat with a roller, sponge or brush, without pooling. Very porous floors may need extra coats.
  5. Wait. About 30 minutes at 20°C, then apply LevelMore Pro, Absolute 30, Flex & Fibre or tile adhesive.

Please note: 5°C or above. Non-porous floors (tiles, asphalt, epoxy DPM, steel): use PrimeMore Grip.

Kelmore PrimeMore Universal Primer (5L)

£34.99

£34.99

Quantity required

In stock

How many bags do I need?

VisaMastercardApple PayGoogle Pay
Free 3 working day deliveryTo mainland UK on any order size
Next working day from £5.99Order by 2pm for same-day despatch
Not sure how much you need? Call 01482 243038 (Mon–Fri, 9am–5pm)
Need a mix of screeds on one pallet? Call 01482 243038 for a quote