Description
Kelmore LevelMore Absolute 30 is a flexible, ultra-rapid setting two-part levelling and smoothing compound for interior floors. It lays from 2mm to 20mm and comes as a 20kg bag with a 4.5 litre liquid bottle. Buy a single pack, packs of 2, 3 or 5, or a pallet of 48.
- From 2mm to 20mm
- Walk on after 30 minutes
- Tiles after 45 minutes, vinyl and LVT after 90 minutes
- Can go over old adhesive residues, including bitumen
- Moisture tolerant, so it can be used below damp proof membranes
Please note: we always recommend priming. The right primer gives the best bond between subfloor and compound.
Where can I use it?
- Concrete & screedsSuitableSand and cement, concrete
- Old adhesiveSuitableIncluding bitumen
- Underfloor heatingSuitableWater and electric
- OutdoorsNot suitableUse Flex & Fibre
Questions
Do I need to prime first?Yes, we always recommend it. Use PrimeMore Universal (diluted 1:3) on sand and cement screeds and concrete, and PrimeMore Grip (neat) on existing tiles, asphalt, epoxy DPMs and steel. For calcium sulphate screeds, call us.
How many packs do I need?Each pack is a 20kg bag plus a 4.5 litre bottle of liquid. Divide your floor area by the coverage per pack at your depth: about 6.7m² at 2mm, 4.5m² at 3mm, 2.7m² at 5mm, 1.35m² at 10mm and 0.67m² at 20mm. Then round up.
When can I walk on it or lay flooring?You can walk on it after 30 minutes. Porcelain, ceramic and natural stone tiles can go down after 45 minutes, and vinyl, LVT and other resilient floors after 90 minutes. These times are at 20°C; cooler or damper rooms take longer.
How long do I have to work with it?About 15 minutes at 20°C, so mix and pour in manageable batches. For more time, LevelMore Pro gives you 30 minutes.
Can it go over old adhesive?Yes, including bitumen, as long as the residue is hard, sound, well bonded and not softened by water.
How thick can I lay it?From 2mm to 20mm.
Can I use it over underfloor heating?Yes, over water-piped and electric underfloor heating.
Can I use it outside?No, it’s for interior floors. Kelmore LevelMore Flex & Fibre can be used inside and out.
What if the floor is damp?Lay a damp proof membrane first, then prime and level. It’s standard practice in the trade. Kelmore One Coat DPM Fast is a one-coat epoxy DPM for screeds up to 98% RH. Once it’s dry, prime it with PrimeMore Grip, then lay Absolute 30.


